QMH conveyor belt ABC repair adhesives are synthesized from polymer materials. Component A is the main agent, component B is the curing agent, and component C is the rubber substrate treatment agent. It can be quickly cured at room temperature to form a polyurethane elastomer with a certain elasticity.
Send InquiryABC three-component design ratio, easy to operate, easy to apply on site
Strong adhesion, strong anti-corrosion and anti-wear performance
Strong tear and impact resistance, can meet the conveyor surface adhesive standards
Quick curing, can reduce downtime and improve work efficiency
After curing, it will not peel off when exposed to water and will not affect the cleaning effect
Odorless, safe for the body and the environment
| Color: | black |
| Specific gravity: | 1. 06 g/cm³ |
| Hardness: | 65±5 Shore A |
| Curing time: | (25℃ RH<80%) Primer 10 minutes, mixed glue 1 hour |
| Product weight: | 500g |
Safety protection:
During use, personal protective equipment such as protective gloves, masks, goggles, etc. should be worn to avoid contact between glue and skin and eyes. If accidentally contacted with the skin, it should be immediately rinsed with plenty of clean water. If you feel uncomfortable, you should seek medical attention in time. At the same time, it should be used in a well-ventilated environment to prevent harmful gases generated by the volatilization of glue from causing harm to the human body.
Storage conditions:
QMH conveyor belt ABC repair adhesives should be stored in a cool, dry, well-ventilated place, away from fire and heat sources. Avoid direct sunlight and humid environments to prevent the glue from deteriorating or curing prematurely. Different batches of glue should be stored separately, and pay attention to check the shelf life. Expired glue may affect the use effect.
Operation skills:
Due to the fast curing speed of glue, QMH conveyor belt ABC repair adhesives should be quick and accurate during mixing and gluing operations to avoid the glue from curing before use. At the same time, during the bonding process, ensure that the surfaces of the bonded objects are aligned and apply uniform pressure to ensure the bonding effect. For the repair of some special materials or complex structures, a small area test can be carried out first to determine the best method of use and process parameters.
If you have any enquiry about quotation or cooperation, please feel free to email or use the following inquiry form. Our sales representative will contact you within 24 hours.
